This live capture trap is designed to have a high interaction rate and trap a range of predators. There is an option for this to be controlled by the DOC AI camera to avoid catching non-target species. This is the 3rd version of the trap that is smaller, lighter and less expensive than the previous versions. These improvements were made by redesigning the mechanism for snapping the blinds shut into a single structure that includes the spring mechanism, electronics and sensor. We've also removed unnecessary parts to make it lighter and easier to set up.
The trap consists of two open sides with spring loaded blinds that snap shut when movement is detected inside the trap. At the side of the trap is an opening leading to a holding cage.
When an animal enters the trap the blinds close and the animal typically makes its way quickly into the holding cage. This video shows the trap in action catching rats, possums, hedgehogs and cats (note this is an earlier version that had 3 open sides).
The trap is a live capture trap and so needs to be checked daily. The trap automatically resets 10 minutes after it triggers. This means if the trap is triggered accidentally (say by a small animal such as a mouse) then it will reset and can catch a larger animal.
The trap comes with a battery, charger and hessian hazing. Additional batteries and chargers may be purchased separately. The trap optionally comes with a cage. Any live capture cage trap should be able to be used with it.
The trap is available for sale with a small number in stock and a lead time of 10 weeks if you want to order more. If you would like to order more than 100 of the traps then the price drops to $1249/trap, however there is a 4 month wait for this volume of traps. If you would like to rent the trap please contact us .
Read the manual for the Cacophony trap here.
High interaction rate important
The Cacophony Project designed this trap because they observed with their thermal cameras that other traps have a very low interaction rate: typically for every 100 predators that is seen near a trap less than one will interact with it.
They created a model for how predator numbers will be impacted by traps with different interaction and kill rates and density. This model closely predicts actual predator numbers.
In this model they found that the interaction rate made a massive difference to the predator numbers: increasing it from 0.4% to 9% would change the impact of traps from suppression to elimination in a matter of weeks.
The highest interaction rate trap the Cacophony Project had found was a live capture trap with an interaction rate of around 5%. They assumed that this was because the trap was easy to access because of the large opening and because it was on the ground rather than up a tree.
Inspired by the live capture traps we have made the trap as open as possible and have amplified this by adding hazing to draw animals into the trap. We sell this hazing as a separate product. Our initial experiments, using hazing, have shown an interaction rate of 20-50%.
AI control option
There is an option to control the trap with the DOC AI Cam. The camera can be configured to run the AI in real time and either enable the trap when a target pest is identified, or disable it when a non-target is identified. In order to connect the camera to the trap, you will need an auxiliary cable.
Read about the initial experiments with the AI controlled trap here.
Live capture
Because this is a live capture trap it does need to be checked every day so the caught animals do not suffer and to release anything unintentionally caught. This is labour intensive and not practical in many situations. We are working on solutions to this including integration with automatic kill mechanisms.
One option we have found effective is to set up one of our thermal cameras pointing at the trap. If the camera has a data connection then you can check the trap remotely. Although, from our experience you are going to be clearing the trap most days to start with. We have also used remote trap monitoring solutions like the Celium network from Encounter Solutions.
Option to disable when cage closed
There is an option to have a magnetic switch that detects when the cage is closed. This disables the trap, after the first animal is caught, allowing other animals to walk through the trap, creating scent trails and increasing the likelihood they and other animals can be caught after the cage is cleared.
Continuous development
The trap is expensive because it is new and we are only doing small runs (it is cheaper if you order more than 100). We expect the price of the trap to drop once we have a more stable version that uses production tooling to manufacture the parts. That said, we will add features to the trap, including remote reporting and control via the camera. All of these will increase the cost of the trap.
Case studies
- DOC have tested the traps at Te Waihora - see a ten times higher catch rate than other traps
- The Cayman Islands have also seen that the traps are 10x more effective at catching cats than normal cage traps.
- Mamaku Point on Rakiura have had success catching cats inside a predator proof fence where other traps have failed.
Trap videos
Check out our trap videos on your YouTube channel.
Specifications
| Specification | |
| Dimensions (deployed) | 600mm wide, 900m long, 500mm high |
| Dimensions (folded) | 650x350x175mm |
| Weight (without cage or battery) | 3kg |
| Voltage | 12V |
The Cacophony Project
The high interaction rate trap has been developed by The Cacophony Project, a not for profit organisation. A proportion of the proceeds from the sale of these traps will be donated to The Cacophony Project so they can continue to develop technology to help New Zealand become predator free. All the technology developed by The Cacophony Project is open source.
